1/10/2024 0 Comments Snaptain drone h823h instructions![]() ![]() The Gadgeteer review was helpful, especially with the photos. Was afraid I’d break or bend something while the guard was on and wanted to take it off. While getting the blade back down was simple enough, the propeller itself had popped up off the motor shaft. One of the propeller blades got stuck up between the guard and one of the motor supports cracked through. My grandson got this model this Christmas and the next day flew it into an interior wall, not very hard but hard enough to cause some damage. Our crew flew/crashed the SNAPTAIN around the house for a few days and the tiny drone held up very well, mainly because of the propeller cover protecting the drone’s most fragile parts. Overall, there was a slight learning curve for our mini Mavericks, but they soon got the hang of flying the SNAPTAIN and were routinely putting the drone through complicated maneuvers and expertly utilizing the flip feature. The three included LiPo batteries gave our flight crew about 21 minutes of flight time total and each battery took about 45 minutes to fully charge. ![]() This was annoying because I have other drones around the same price range which don’t need such constant tweaking. Our flight team also found that the trims for the drone constantly needed to be adjusted. On a more expensive or higher quality drone you wouldn’t have to do this as often. In fact the auto flip feature is the only feature that worked flawlessly every time and provided the most enjoyment.Īnother challenge with the SNAPTAIN is that before every flight it needs to be paired to the controller by pulling the joysticks down and up until you hear a beep. The problem is these features don’t always work properly, if at all. The extra options of the SNAPTAIN like headless mode, which allows you to fly the drone using your position instead of the drone’s, and auto takeoff and auto return were super helpful for our first time pilots. Since the SNAPTAIN H823H is geared toward beginners, I recruited two young hotshot test pilots, aged 5 and 7, to help put the drone through its paces. It’s very easy to lose these tiny prop screws and it’s pretty difficult to work the old prop off for replacement, but with patience it can be done. After the screws are removed using the included screwdriver, the cover can be pulled back enough to allow for propeller replacement. Three tiny screws have to be removed for each propeller to be replaced. This can be a bit of a challenge due to the propeller cover. The only other maintenance for the SNAPTAIN, besides battery charging, is propeller replacement. The batteries are charged via the included USB cables which plug into any standard USB power block or charger. The drone’s LiPo battery can be removed by unplugging the power plug and sliding the battery out of the holder. Out of the box though all of the drone’s batteries should be charged and three AAA batteries need to be inserted into the controller. Luckily there’s no assembly for the SNAPTAIN H823H and one of the LiPo batteries comes pre-installed in the unit. The controller takes three AAA batteries and the battery compartment can be accessed by removing a screw on the rear of the controller. ![]() There are shoulder buttons for automated functions, buttons to adjust flight trim, clickable flight sticks, and an on/off switch with a LED power indicator. SNAPTAIN manages to get a good number of buttons and controls on to the tiny surface of the controller. ![]() The controller is plastic and mini-sized which is great for tiny hands and was appreciated by my crack team of test pilots. The SNAPTAIN’s LiPo battery sits underneath the unit and is held in place by two brackets and the power plug itself. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |